|
Smart Strip by Peel Away Biodegradable Paint Remover - 5 Gallons
PRODUCT FEATURES:- Removes up to 15 Layers of Paint and Industrial Coatings in ONE SINGLE APPLICATION! Fabulous Paint Stripper for ALL Oil & Latex Paints. Removes Paint, Epoxies, Urethanes, Elastomerics, Chlorinated Rubbers Lead Based Paint Removal No Problem.
- Coverage 50 sq. ft. per gallon
- User Friendly, does not contain methylene. chloride, caustic or toxic chemicals. Will Not Burn Hands.
- Water based formula
- 100 % biodegradable.
- Odor free.
- Does NOT Require Neutralization.
- For Interior and Exterior Use.
View more Paint Removers - Smart Strip
|
BIG SAVINGS FOR DO IT YOUR SELFERS! SUPER SAVINGS - SAVE $130 THAT'S OVER 34% OFF! Smart Strip™ by Peel Away® Paint Stripper is user friendly and does not contain toxic chemicals, caustics or dangerous methylene chloride. Smart Strip™ by Peel Away Paint Remover is a water-based paint stripping formula that will NOT burn your skin and is 100% biodegradable. Guaranteed great results. Smart Strip™ by Peel Away® is an extremely effective paint stripping product for ALL Oil Paints, Latex Paints, Acrylic Paints, Lead Based Paints, Oil Based Paints, Water Based Paints, Shellac and Stains. Removes Epoxies, Urethanes, Elastomerics and Chlorinated Rubbers. Lead based paint removal and lead abatement never a problem. No job too big or too difficult for Smart Strip™. USE ON:
Works on almost all surfaces, wood, brick, concrete, plaster, steel, iron, fiberglass, etc. Easily adheres to vertical or overhang surface. Can be used on interior and exterior surfaces.
EASY TO APPLY:
For best results, surface temperatures should be 60ºF – 95ºF. Product can be applied as low as 37ºF, however, efficiency/effectiveness are reduced and dwell time increases.
Test Patch: Always prepare a test area on each type of surface and paint coating prior to full application. Testing before beginning the project is the best way to ensure product suitability. This will also determine the proper thickness of the remover and the dwell time required for project completion.
Preparation: Mask/protect areas where stripping is not desired, including adjoining surfaces where overspray may travel. Polyethylene (plastic sheets) and masking tape create an effective barrier. Plants and other foliage should be covered or rinsed thoroughly before and during application.
NOTE: SMART STRIP™ will not affect glass, aluminum, or plastic surfaces.
Application & Spread Rate: Using brush, roller or airless spray, apply approximately 1/6” to 1/8” thick (refer to test patch results) according to the age, number of layers, and type of coating being removed. SMART STRIP™ provides an average spread rate of 45 - 50 sq. ft. per gallon; results may vary.
Removal: Remove softened/lifted paint using a scraper, taping knife, squeegee or power washer. Agitate tough to remove residue with a stiff nylon brush or scouring pad, paying particular attention to crevices, grooves and cracks. Exterior stripped surfaces should be rinsed thoroughly with a power washer. Interior surfaces can be rinsed using a spray bottle or pail, a sponge and water, or denatured alcohol to remove remaining residue.
Clean Up: Collect remover, paste and paint residue in plastic bags and dispose of in compliance with local government regulations. Do not collect or store removed paint/paste waste in metal containers. Clean up airless sprayer by running water or denatured alcohol through the equipment soon after application has been completed. Allow surface to dry thoroughly before repainting.
Accelerate the Paint Removal Process with our EXCLUSIVE technologically advanced fibrous Paint Removal Paper Click Here For Details I love the new Peel Away® Smart Strip™. We worked with other paint
removers in the past and nothing comes close to the effectiveness of this
product. We used it in our bathroom to remove paint from our tile floor. It
worked great! We also used it on our cupboard doors in our kitchen. Again it did
not have any problem removing the paint right down to the wood.
Thank you for providing us with such an easy to use effective paint
remover.
I bought a 100 year old house a couple of years ago. It was a rental for 20 +
years and it needed some love to say the least. There was years of paint build up
on the simple colonial trim. It was improperly applied latex over oil. It was
coming off in places and in places so thick that you could not see detail on the
trim. I knew the house had hardwood floors when we looked at it but they were
covered with carpet. Before we moved in, I removed the carpet and to my dismay
there underneath was what I believe to be at least 30 year old carpet backing
and glue. I had to remove the carpet as it smelled of the pets that previously
lived there but I could not refinish my floors immediately.
I remembered your products from watching This Old House as a child with my
parents. I am only 35 right now. I found your site and looked at all you had to
offer.
We bought a gallon and began to try it out on our built in china closet as it
was the most detailed piece we had in the house. We also purchased the Peel Away
paper . The Smart Strip smelled nice and was easy to apply. The paper worked
wonders and allowed us to have a life while the product did it's job.
Thanks for making great easy to use products that produce fantastic
results!
Sincerely, Christina K. Q. Does Smart Strip™ really work on all surfaces?
A. ABSOLUTELY! Smart Strip™ works on
virtually ALL interior and exterior surfaces including all sorts of wood, brick,
metal, concrete, stone, plaster, fiberglass, steel, iron etc. There is nothing
like Smart Strip --- we believe it is the most versitile paint remover
available.
Q. Does Smart Strip™ work quickly?
A. In most instances Smart Strip™ Paint
Remover will remove up to 15 coats of stubborn paint in one single application.
Incredible results and so easy to use. Starts to work in minutes to remove
muliple layers of stubborn old paint.
Q. What kind of paints will Smart Strip™ remove?
A. Removes ALL Oil and Latex Paints. Even on
Brick! Removes virtually ALL Paint, Epoxies, Urethanes, Elastomerics,
Chlorinated Rubbers etc. Smart Strip™ works on almost any paint imagineable!
Q. Is Smart Strip™ safe for the environment?
A. YES, Smart Strip™ is water based, odor
free and 100% Biodegradable. Best of al Smart Strip™ does not contain methylene
chloride, caustic, or toxic chemicals and wil NOT BURN YOUR HANDS.
Q. Will Smart Strip™ work on detailed intricate
surfaces?
A. YES , Smart Strip™ Paint Remover can be
used on the most intricate detailed and carved surfaces. How to remove paint
from moldings, picture frames, old doors, book cases, etc ?? Smart Strip is your
best choice.
Q. Can Smart Strip be used to remove lead based paint?
A. No Problem! , Smart Strip™ is
exceptional for lead-based paint removal. Smart Strip Loves Old Lead Paint.
Q. Will Smart Strip™ remove paint from dry wall?
A. Smart Strip™ paint remover is extremely
effective to remove paint from dry wall. First do a "test patch" to determine
how much time Smart Strip™ should remain on the painted dry wall. Generally,
less than two hours should be sufficient. You do not want leave it too long and
possible remove the paper portion of the dry wall. Go slowly and if necessary
re-apply Smart StripTM. You will amazed with the results.
Q. What about furniture paint removal?
A. Smart Strip™ is one of the FINEST
FURNITURE PAINT REMOVERS we have ever seen. Works on new furniture and antiques.
Works on all types of wood(including oak, walnut, mahogany cherry etc). Removes
paint, stains, varnishes, and all sorts of architectural coatings.
Q. Will Smart Strip™ remove marine paint? Will it
damage the gel coat?
A. Smart Strip™ is great for the removal of
marine coatings and will not damage the gel coat. For really tough marine paints
with over 10 coats of paint use Peel Away® Marine Safety Strip Paint Remover.
Q. How do you apply the Smart StripTM?
A. It is easily applied by brush, roller, or
conventional airless sprayers. It easily adheres to all vertical or overhanging
surfaces
Q. How long does the Smart Strip™ need to stay on the
surface and how do I remove it?
A. Dwell time will vary depending on the
type of coating, number of layers, and temperature. For best results, allow
paste to dwell overnight or longer. Remove the softened/lifted paint using a
scraper, taping knife, or power washer. The stripped surface should then be
rinsed with water or denatured alcohol to remove any remaining residue. Allow
the surface to dry thoroughly before repainting.
Q. Can Smart Strip™ be used in any temperature?
A. For best results, surface temperatures
should be 60 degrees F - 95 degrees F. Smart Strip™ . Can be applied as low as
37 degrees. However, the effectiveness may be reduced and the dwell time may
increase.
Q. Does Smart Strip™ require the use of the Peel Away
paper?
A. No, Smart Strip™ does not require the
use of the Peel Away Paper. The paper can be used with it if you like. It can
make clean up easier in many instances when you are working indoors or if you
are working overhead. The Peel Away™ Paper will also accelerate the paint
removal process. The paper can be purchased separately with no additional
shipping costs. To purchase Peel Away Paper click here.
Q. Do I really need to do test patches before I start?
A. Yes, Always prepare a test area on each
type of surface and paint coating prior to full application. This will determine
the proper thickness of the remover and the dwell time required for project
completion.
Q. How do I remove Smart Strip™ from rougher surfaces
like brick, concrete or stone?
A. SMART STRIP WORKS GREAT ON TOUGH SURFACES
LIKE BRICK, CONCRETE, STONE AND MARBLE. For rougher surfaces, if possible, a
power washer is the best way to remove Smart Strip. If not, interior surfaces
can be rinsed using a spray bottle of clean water and a nylon bristle scrub
brush . After a thorough scrub, spray again with water to remove any remaining
residue.
›Airplanes
›Asphalt
›Auto
›Beaded Ceilings
›Brass
›Brick
›Cabinets
›Cements
›Ceramic File |
›Cherry Wood
›Chrome
›Concrete
›Copper
›Doors
›Dry Wall
›Epoxies
›Exteriors
›Fiberglass |
›Floor
tile
›Formica
›Furniture
›Graphite
›Interiors
›Iron
›Metal
›Moldings Intricate
›Oak |
›Plaster
›Porcelain
›Softwood
›Steel
›Stone
›Stucco
›Vinyl Siding
›Wood Decks |
|
Plus More! |
|
